The Official Marshmallow Yu OS for Yu Yureka, Yuphoria, and Yunique starts rolling out. The Marshmallow update for Yu devices is in Beta stage, and these smartphone will get a stable Android Marshmallow build in next 30 days. The exclusive deal for Cyanogen-Yu ended earlier this month and the YU is now working on a new OS, called Yu-Open-OS under ‘Project Highway‘. The company inviting developers to download and contribute to the new OS. You can Download Official Marshmallow Yu OS for Yu Yureka, Yuphoria, and Yunique from below.

Download Official Marshmallow Yu OS for Yu Yureka, Yuphoria, and Yunique

Yu founder Rahul Sharma post on the official forum –

Developers and contributors have been special to us. When we rolled out ‘Project Highway’, we wanted to get as many people on board as possible. Pleased to share thatdeveloper.yuplaygod.com is live as of NOW and happy to share today we are making available the open-sourced OS for YUREKA/YUREKA PLUS, YUPHORIA and YUNIQUE and Inviting all the developers to participate and contribute to YU-OPEN-OS.

Under ‘Project Highway’ we will be curating source codes from multiple drop points, such as Google’s AOSP repos, Chipset Vendors Repos, Various ROMs (where the community developers contribute), Internal YU customization and finally creating one manifest which will be able to support all YU based devices and other Andriod devices too.

Official Marshmallow beta is already available for YU Yureka, Yureka Plus, and Yunique and stable version will be arriving in the next 30 days. You can Download Official Marshmallow Yu OS for Yu Yureka, Yuphoria, and Yunique from the link below.

Download Official Marshmallow Yu OS for Yu Yureka, Yuphoria, and Yunique

  • YU Yureka Beta Marshmallow ROM – Download
  • YU Yuphoria Beta Marshmallow ROM – Download
  • YU Yunique Beta Marshmallow ROM – Download

Prerequisites –

  • You should have Yu Yureka, Yuphoria, and Yunique device.
  • Your device bootloader must be unlocked.
  • Download ADB and fastboot driver for windows or ADB and Fastboot for Mac and install it on your PC. This will also install your device driver.
  • Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
  • It will erase all your personal data including data of internal storage, so we advise you first to take a complete backup of your phone and then proceed.
  • Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.

How to Install Marshmallow on Yu Yureka, Yuphoria, and Yunique manually –

1) Download Official Marshmallow Yu OS from above and extract it on your PC to the ADB installer directory.

2) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.

3) Now connect your device to PC and enter into the fastboot mode. To enter in fastboot mode of Lenovo ZUK Z1 type the below command in command prompt.

adb reboot bootloader

4) You are in Fastboot mode now to check your connection by entering below command in command prompt. It will return your device serial number means your device properly connected. Check your driver if the above command is not responding. (device code input: -i 0x2A96 for Yuphoria-i 0x1ebf for Yureka)


fastboot <device code> devices

5) Now Unlock the bootloader of your device with below command.

We used device code of Yureka 0x1ebf as an example replace it with your device code

fastboot -i 0x1ebf oem unlock

6) Now place the following command to Format User data on your device.

fastboot -i 0x1ebf format userdata

7) Now issue the following command one by one to flash the YU OS on your device.

fastboot -i 0x1ebf flash boot boot.img
fastboot -i 0x1ebf flash recovery recovery.img
fastboot -i 0x1ebf flash system system.img
fastboot -i 0x1ebf flash userdata userdata.img

8) Now relock your bootloader with following command.

fastboot -i 0x1ebf oem lock

9) Reboot your device.

fastboot -i 0x1ebf reboot

10) Done.

The above commands will install the Official Marshmallow Yu OS for Yu Yureka, Yuphoria, and Yunique. If you have any doubts comment below.

Source – YU

 

Author

Sumit is a Tech and Gadget freak and loves writing about Android and iOS, his favourite past time is playing video games.

82 Comments

  1. Hi, I have installed this OS but not able to get Google play services and playstore . How to install playstore on this.

  2. Deepayan chowdhury Reply

    is this an update with bugs or is it an official update?. also is yureka no longer gonna get cyanogen updates?

  3. Nirman parkar Reply

    How long does it take to boot for the first time. I waited for almost 20mins and the phone was stuck on boot logo. Any help

  4. Nandan Hegde Reply

    hey, i did all the same as mentioned. Now my phone is continuously vibrating once switched on.

    • Nandan Hegde Reply

      Once after flashing, i locked the bootloader i guess that caused me that problem. Once i again i performed the same process without locking the boot loader, now its stuck in boot logo.

      • Nandan Hegde Reply

        Ok finally for the third time. It was a success. Scared me like hell

        • I’m glad you successfully managed to install it on your device..Can you share with others what you missed in first time..so that other will take benefits with any issue.

    • dear, please help me, i am facing same problem and now very scare, because this phone belongs to my big brother, please suggest me what should i do now,,,,,, fast

  5. Nandan Hegde Reply

    Ya sure. After flashing with all the commands, i believe ” fastboot -i 0x1ebf oem lock ” this command of locking boot loader is causing the issue. Better not perform it and directly move onto rebooting once all the process is done. Please be patient as in for a while it looks like its stuck in boot loop. Later on it will boot normally. Also make sure you have charged your device well before performing to avoid unexpected power off during this process.

  6. Nandan Hegde Reply

    Also, I am aware its beta build and i have observed several bugs. How and where can i report it. Can you drop of a link to it which will be quite helpful for a small contribution.

  7. Nandan Hegde Reply

    Can this be rooted and can i install Custom recovery on this. I want to flash other ROM so am not sure how do i do it when i am having this beta build.

      • my yureka was rooted, and then i installed this os by following these methods, and later i realised my rood access have been denied after that full format, so if you flash this os, you will be unrooting your phone too along with it

  8. in cmd promt it says -i is not recognized as internal or external cmd how to find my device code

  9. hey if the phone is vibrating continuesly then how to put it back to fast boot mode i tried restating it is same even after restarting

    • Kiran Bedre Reply

      follow below steps.
      1. Remove battery.
      2.plug-in USB cable and hold volume-up button
      3. Now insert battery

      U vl be directed to Fastboot mode

      From here on u can be able to use fast boot commands in below path except step#8.
      http://download.yuplaygod.com/#

      Thank You!

  10. vinodkumar Reply

    In YU unique marshmallow os has so many bugs like microphone not working properly,messaging app not working not have play store,if you install play store then play store issue like so many problems it is an unofficial os don’t install

  11. I have yuphoria mobile phone
    When you given software update Android 6.0 marshmello ????
    & reply quickly…

  12. I have yu yuphoria 5010 mobile phone,
    When you given software update Android 6.0 marshmello

  13. John paul thamba Reply

    What’s the device code of Yu Yunique YU4711…I will flash official marshmallow os

  14. Predator_47 Reply

    Can you make an image of yuOS so that we can flash it through TWRP or CWM?

  15. This isn’t working on my device, my phone is stuck at yu logo and continuesly vibrating . I think it is stuck at boot loop. I am using yureka plus the one with stock android kitkat and not cyonogen os. What should i do now ?

  16. bhai koi to help kar do yaar. yureka phone update kiya, sare step follow kiye, ab phone vibrate ho raha h, pichle aadhe ghante se, please help me……..

    • Try again and this time skip step no 8. Some users says that cause the issue. Also try clearing the cache from recovery.

      • bhai ab to phone hi show ni ho raha computer mai, agar step 8 mai dikkat h to ap post ko theek ni kar sakte, mera phone shayad kharb ho gya…

  17. my yureka is stuck at that balls logo about 1 and half hour still not open … first bootup is taking very long time
    help?

  18. John Paul Thamba Reply

    i want to know the device code of yu yunique please admin………..

    • You don’t need device code for yunique.
      Try the code without device code like fastboot oem unlock.

  19. Nayan Kashyap Reply

    After install marshmallow on my yunique4711 device … i need to install Opengapps but i need to to know which platform and variant for this device ??????? plz help me iam stuck at the last steps plz help

  20. I have Custome rom(HexagonOS 6.0) installed in my Yureka YU5510. I want stock OS with 6.0 only and please confirm that can i flash this rom with Gapps.
    You r doing great job. Thanks in advance.

  21. I have installed this yu os on my yureka, and then i realized that i cannot switch to bootloader or fast boot mode , if i have to change to custom rom and root yureka, how can i do it?

  22. Did anyone figure out to install gapps along with this. Yuphoria.

  23. For those who face the problem for Opengapps … here is the solution.. Download YUOS Official – Andriod 6.0.1 from http://download.yuplaygod.com/ and use it… do all the steps just skip “”fastboot -i 0x1ebf oem lock”” reboot and enjoy ,,,,,,,,,,,,,

  24. Hi Sumit forgot to tag you, can you please advise me which procedure to follow for the official Marshmallow for Yu Yunique

    • Both the method works…the link you shared has batch files which automated the process and with above method you have to flash the files manually. Both methods will you can use any of them.

  25. Thanks for reply,

    In the disclaimer of http://download.yuplaygod.com, there is a Note that says YuOS MM does not support voice call feature for voLTE, is that true?

    Then I should stay on 5.1 until another build comes with the update, though the available MM build seems stable.

    • Hi Sumit, I have YU yurekha 5510 with upgraded 5.1 android lollipop, I have took a Jio sim the network bars has appeared but still my data services are not activated.does nt show any sign of lte or volte. Need help

  26. Sanjib Das Reply

    My phone not start after doing this. Only shows YU logo and variate only. please help me.

  27. After marshmallow update I am not able to use maps. As soon as I open the maps and set the travel mobile restarts. I think some problem with location. Pls let me know how to fix.

  28. I installed it in my yureka but after this i cant open bootloader , fastboot mode ,recovery nothing also the updates are not installing of CM 13..what should i do??

  29. Swapnil Agrahari Reply

    Can anyone tell me the advantages and disadvantages of installing this OS ???

  30. Hi! I followed these steps and stuck at the logo overnight. I tried to get it boot into fastboot mode (Vol Up+Power) and the phone is not detected, so I can try to reinstall.

  31. If this is official OS, why are we not getting it in software updates? Did anyone successfully upgraded to marshmallow using above steps, or any other url is there for Yu Yureka which has easy steps and no issues?

Write A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.